One of the components of the Internet connection on your computer is a built-in set of instructions called TCP/IP. TCP/IP can sometimes become damaged or corrupted. If you cannot connect to the Internet and you have tried all other methods to resolve the problem, TCP/IP might be causing it.
Because TCP/IP is a core component of Windows, you cannot remove it. However, you can reset TCP/IP to its original state by using the NetShell utility (netsh).
This post describes technical support ways to reset TCP/IP. You must be logged on to the computer as an administrator.
Use a manual method to reset TCP/IP
The reset command is available in the IP context of the NetShell utility. Follow these steps to use the reset command to reset TCP/IP manually:
1. To open a command prompt, click Start and then click Run. Copy and paste (or type) the following command in the Open box and then press ENTER:
cmd
2. At the command prompt, copy and paste (or type) the following command and then press ENTER:
netsh int ip reset c:\resetlog.txt
Note If you do not want to specify a directory path for the log file, use the following command:
netsh int ip reset resetlog.txt
3. Reboot the computer.
For Advance troubleshooting use computer support service
Showing posts with label windows internet setting. Show all posts
Showing posts with label windows internet setting. Show all posts
Posts
